Tube Cleaning Systems
 |
Products in this category
- Quality Systems
- 2 Stage Tube Cleaning System
- 2 Stage Tube System with Autoload
- Multiple Stage Tube Cleaning System
|
Tube Cleaning Systems provide effective part cleaning and drying to meet your production cleaning requirements. Systems are available in single or multi-stage configurations to suit virtually any type of cleaning application including washing, rinsing, rust inhibiting, and drying.
Our Tube Cleaning Systems can accommodate various lengths and a wide variety of tube diameters in the rotating drum. Manual or automatic load and unload systems are available.
Rugged stainless steel tanks and enclosures provide superior durability, chemical resistance and quality appearance. Systems can be equipped with all popular heating systems including electric, gas or steam.
Standard features include:
- The tank and upper housing are constructed of 10 gauge, 304 stainless steel. 2" mineral wool insulation is covered by 16 gauge, polished, 304 stainless steel skin.
- Vertical centrifugal pumps with carbon steel wetted parts are sized for the most effective coverage within the spray stage.
- During the immersion process, internal spray headers are designed to assist in the cleaning of the interior and exterior of the tubes.
- A mild steel bag filter follows each pump. Each filter has two (2) pressure gauges to indicate the need for a filter bag change.
- Tanks are heated by stainless steel immersion heaters designed to maintain the specified temperature.
- Automatic liquid level controls fill the tanks and protect the pumps and heaters.
- Each tank top is equipped with a maintenance access removable lid.
- Standard units can accommodate ½
- 2 ½" diameter tubes. Lengths can vary from 8" to 72". Systems can be designed for larger diameters and longer lengths.
- The dry off is accomplished using a stainless steel tubular heater following a regenerative blower. A filter, relief valves, and gauges are assembled with the blower.
- Stainless steel air knives are positioned to direct air through the tube while drying the exterior.
- NEMA 12 main control panel.
- All guarding and labeling meets OSHA standard requirements.
|
Available Features:
- Stainless Steel Pumps and Filters
- Oil Coalescing System
- Ultra-Filtration System
- Custom Material Handling
- Chip Conveyor
- Exhaust System
- Mist Collection System
- Automatic Chemical Metering
- Pressure Transducer to indicate filter maintenance
- NEMA Electrical Controls
- PLC and Operator Interface
- Ethernet and PLC Modem Capability
|
|
