|
Rotary Table
|
 |
Products
in
this
category
|
|
|
|
2 Stage
30"
Rotary
Table |
|
5 Stage
Rotary
Table |
|
Multiple
Stage
Rotary
Table |
| |
|
|
Standard features include:
-
The tank top and
upper housing are
constructed of 7
gauge, 304 stainless
steel. The tank
itself is
constructed of 10
gauge, 304 stainless
steel. 2" mineral
wool insulation is
covered by 16 gauge,
polished, 304
stainless steel
skin.
-
Vertical centrifugal
pumps with carbon
steel wetted parts
are sized for the
most effective
coverage within the
spray stage.
-
As the table rotates
through the various
stages, internal
spray headers are
designed to surround
the parts and
provide complete
spray coverage
throughout the
cleaning process.
-
A mild steel bag
filter follows each
pump. Each filter
has two (2) pressure
gauges to indicate
the need for a
filter bag change.
-
Dual stainless steel
mesh screens protect
the pump suction.
-
Tanks are heated by
stainless steel,
element immersion
heaters designed to
maintain the
specified
temperature.
-
Automatic liquid
level controls fill
the tanks and
protect the pumps
and heaters.
-
Each tank top is
equipped with a
maintenance access
removable lid.
-
Each process stage
in the upper housing
has a lift out
access door that
allows easy
maintenance entry.
-
Standard units have
a 1" thick stainless
steel table that is
water jet cut to
allow for spray
access and fixture
attachment.
-
The dry off stage
has a stainless
steel tubular heater
following a
regenerative blower.
A filter, relief
valves, and gauges
are assembled with
the blower.
-
Stainless steel air
knives are
positioned to direct
air to all sides of
the parts being
processed.
-
NEMA 12 main control
panel.
-
All guarding and
labeling meets OSHA
standard
requirements.
|
Available Features:
-
Stainless Steel
Pumps and Filters
-
Oil Coalescing
System
-
Ultra-Filtration
System
-
Custom Material
Handling
-
Chip Conveyor
-
Exhaust System
-
Mist Collection
System
-
Automatic Chemical
Metering
-
Pressure Transducer
to Indicate Filter
Maintenance
-
NEMA Electrical
Controls
-
PLC and Operator
Interface
-
Ethernet and PLC
Modem Capability
|
|
Rotary Table Parts
Cleaning Systems provide
effective part cleaning
and drying to meet your
production cleaning
requirements. Systems
are available in single
or multi-stage
configurations to suit
virtually any type of
cleaning application
including washing,
rinsing, rust
inhibiting, and drying.
Rotary Table Systems can
accommodate a wide
variety of part sizes
and geometries and
process large heavy
parts. Parts can be
loaded directly on to
the table or into
specially designed
fixtures. Manual or
automatic load and
unload systems are
available.
Rugged stainless steel
tanks and enclosures
provide superior
durability, chemical
resistance and quality
appearance. Systems can
be equipped with all
popular heating systems
including electric, gas,
or steam.
|
|
|
