|
PR Systems
Pneumatic Recovery Systems
Pneumatic recovery systems offer an
economical approach to abrasive
recovery and offer flexibility in
blast room sizing.
|
PRS systems
offers an economical
alternative to a full
blast-room for
limited-use operations.
In addition to
pneumatically collecting
media, the unit recycles
and cleans abrasives
through a cyclonic
reclaimer attached to a
media-filtration system. |
 |
Specifications for Pneumatic
Recovery System
|
Model No. |
Part No. |
Blast System |
Chassis |
|
PRS-6 |
245006 |
Mounts to existing 650
pot |
Skid |
|
PRS-6D |
246006 |
Mounts to existing 650
pot |
Dolly |
|
PRS-6S |
247108 |
SuperBlast 650 pot
supplied |
Skid |
|
PRS-6SD |
246108 |
SuperBlast 650 pot
supplied |
Dolly |
|
PRS-10 |
245010 |
Mounts to existing 1050
pot |
Skid |
|
PRS-10D |
246010 |
Mounts to existing 1050
pot |
Dolly |
|
PRS-10S |
247110 |
SuperBlast 1050 pot
supplied |
Skid |
|
PRS-10SD |
246110 |
SuperBlast 1050 pot
supplied |
Dolly |
|
Media Recovery Hopper
-
11-guage, welded
steel construction
-
Anti-clogging refuse
screen
-
30" wide x 30" deep
x 12" high
|
Blast Apparatus ("S" and
"SD" models)
-
5/16",
silicone-carbide,
venturi nozzle
-
1-1/4" - ID x
50'long, heavy-duty
blast hose with
couplings
-
Saf-Stop II™
pneumatic
blast-control handle
(OSHA)
-
55' dual-line
pneumatic control
hose
|
|
Media Conveying Duct
|
Dust Collector/DCM-200
HV (High Vacuum)
-
14-gauge,
welded-steel,
reinforced
construction
-
200 ft2
filtration with 30
cotton-sateen bags
-
Large access door;
raised clean-out
door
-
Push-button,
pneumatic cleaning
|
|
Media Reclaimer
-
Rugged, 12-gauge,
welded-steel
construction
-
Ultrawear lining
with externally
replaceable
wearplate
-
Easy alteration for various
media sizes
-
800 CFM ventilation
|
Pressure Blower
-
10 hp, 3450 RPM, 800
CFM (at 42" static
pressure H2O)
-
440-480 V, 60 Hz,
fused disconnect
|
|
Media Storage Hopper
-
11-gauge,
welded-steel
construction
-
Viewing window
-
Capacity: 6.5 ft3
with PRS-6 models;
10.5 ft3
with PRS-10 models
-
Nominal diameter:
24" on PRS-6
models; 30" on
PRS-10 models
|
Chassis
-
Heavy-channel iron,
welded and
reinforced
-
Access ladder with
hand holds
-
Cut-outs for
forklift transport
-
Heavy-duty rubber
casters on "D" and
"SD" models
|
|
Pressure Vessel ("S" and
"SD" models)
-
SuperBlast 650 or
1050, ASME
construction
-
780 remote controls
with automatic
Sure-Flow®
grit valve
-
1-1/4" piping
-
Capacity: 6.5 ft3
with PRS-6 models;
10.5 ft3
with PRS-10 models
-
Moisture
separator/filter and
choke feature
|
Higher volume, larger rooms, heavier
abrasives may require a mechanical
system to recover abrasives. This
can be offered in many
configurations of both partial and
full recovery floors.
|
