"F" Media- For
light deburring and burnishing:
"F" Media contains just the right
amount of finely-sized aluminum
oxide abrasives for light deburring.
When used with proper compounds, it
will impart a very desirable
burnished, or polished finish. It
weighs approximately 85 pounds per
cubic foot and is white in color.
"ECH" Media- For
cutting and fine finishing: "ECH"
media is a general purpose
pre-tumbled media containing
aluminum oxide abrasive. Intended
primarily for medium cut
applications, it will leave a smooth
surface finish because of the size
of the abrasive grain. Economically
priced, "ECH" media is extremely
efficient when the amount of metal
removal is compared to media wear.
It weighs approximately 90 pounds
per cubic foot and is dark brown in
color.
"C" Media- For
cutting and burnishing: "C"
media contains a coarser-grained
aluminum oxide abrasive. It's rate
of metal cut compared to media wear
makes it a very efficient media.
When used with other compounds, "C"
media will also provide a burnished
finish. It weighs approximately 85
pound per cubic foot and is blue in
color.
"XC" Media- For
aggressive cutting: This
unusually aggressive media gets to
work right away in the removal of
heavy burrs, flash, or scale. Since
it is made with finely sized
aluminum oxide abrasive, amazingly
good finishes can be obtained. It
weighs approximately 85 pounds per
cubic foot and is greenish-grey in
color.
"HE" Media- For
aggressive cutting and large
equipment: Our "HE" media has
been formulated for applications
involving centrifugal force
equipment and large cross-section
vibrators. The aluminum oxide
abrasive in this pre-tumbled media
is blended with a hard ceramic body
to increase durability and minimize
fracturing. A very fast cutting
composition, this media weighs
approximately 100 pounds per cubic
foot and is tan in color.
"SC" Media-
Especially suited for materials to
be welded, brazed, or soldered:
"SC" is an aggressive cutting media
which contains silicon carbide
abrasive grain. It is recommended
for use on parts that can have no
aluminum oxide impregnation (usually
parts to be welded, brazed, or
soldered.) It weighs approximately
85 pounds per cubic foot and is
white in color with blue specks.
"H" Media- For
super fast cutting: A tough,
faster cutting, longer-wearing, very
efficient cutting media. "H" media
contains aluminum oxide abrasive
grain, weighs approximately 108
pounds per cubic foot, and is grey
in color.
"PZ" Media- Ideal
for burnishing or accelerated
chemical deburring: An extremely
heavy, high-density media that can
replace steel media for burnishing.
Increased weight decreases time
cycles in acid process deburring. It
weighs approximately 130 pounds per
cubic foot and is cream colored.
